316 is a grade under the American standard and belongs to corrosion resistant steel and is austenitic stainless steel.
The national standard is 0Cr17Ni12Mo2, which is better than 304 stainless steel.
In seawater and other various media, the corrosion resistance is better than 0Cr19Ni9. It is mainly resistant to pitting materials.
316 stainless steel rod features
1.The appearance of cold rolled products is good and beautiful;
2.Excellent corrosion resistance, especially pitting resistance;
3.Excellent high temperature strength;
4.excellent work hardening (weak magnetic after processing)
5.The solution state is non-magnetic;
6,.relatively 304 stainless steel, the price is higher.
316 stainless steel rod chemical composition
Carbon C : ≤ 0.08
Silicon Si: ≤1.00
Manganese Mn: ≤ 2.00
Sulfur S :≤0.030
Phosphorus P :≤0.035
Chromium Cr: 16.00～18.50
Nickel Ni: 10.00～14.00
Molybdenum Mo: 2.00~3.00
Stainless steel rod use
316 stainless steel bar:
316 stainless steel contains molybdenum and low carbon content, which is much better than 304 stainless steel in marine and chemical industrial environments.
Has good corrosion resistance, heat resistance, low temperature strength and mechanical properties.
Uses: tableware, cabinets, boilers, auto parts, medical equipment, building materials, food industry (use temperature -196 ° C -700 ° C).
304L stainless steel bar:
As a low carbon 304 steel, in general, the corrosion resistance is similar to that of 316L, but after welding or after stress relief, it can maintain good corrosion resistance without heat treatment.
310 stainless steel bar:
The main features are: high temperature resistance, generally used in the boiler, car exhaust pipe. Other properties are general.
310S stainless steel bar:
It is austenitic chrome-nickel stainless steel with good oxidation resistance and corrosion resistance. Because of the high percentage of chromium and nickel, it can work continuously at high temperature and has good high temperature resistance.
303 stainless steel bar:
It is easier to cut than 304 by adding a small amount of sulfur and phosphorus. Other properties are similar to those of 304.
302 stainless steel bar:
302 stainless steel rod is widely used in auto parts, aviation, aerospace hardware tools, chemical industry.
301 stainless steel bar:
good ductility for molding products. It can also be hardened by mechanical processing. Good weldability. Wear resistance and fatigue strength are better than 304 stainless steel.
202 stainless steel bar:
Belongs to chrome-nickel-manganese austenitic stainless steel, which is better than 201 stainless steel.
201 stainless steel bar:
Belongs to chromium-nickel-manganese austenitic stainless steel, the magnetic is relatively low.
410 stainless steel bar:
Martensitic (high-strength chrome steel), good wear resistance and poor corrosion resistance.
420 stainless steel bar:
“cutting grade” martensitic steel, similar to Brinell high chromium steel, the earliest stainless steel. Also used for surgical knives, it can be done very brightly.
317 stainless steel bar:
Anti-pitting performance is better than 316 steel. Used for printing and dyeing equipment materials.
430 stainless steel bar:
Ferritic stainless steel, for decoration, for example for car accessories. Good formability, but poor temperature resistance and corrosion resistance.
302 stainless steel ball belongs to austenitic steel, which is close to 304, but the hardness of 302 is higher, HRC ≤ 28, with good rust and corrosion resistance.
316 stainless steel rod international standard
28GA=0.015inches=0.38mm
26GA=0.018inches=0.46mm
24GA=0.024inches=0.61mm
22GA=0.030inches=0.76mm
20GA=0.036inches=1.00mm
18GA=0.048inches=1.25mm
16GA=0.060inches=1.60mm
14GA=0.075inches=2.00mm
12GA=0.105inches=2.70mm
316 stainless steel rod price
| Min. Order / Reference FOB Price | |
|---|---|
| 1 Ton | US $2,760-3,350/ Ton |
| Port: | Shanghai, China |
|---|---|
| Production Capacity: | 4500 ton/Year |
| Payment Terms: | L/C, T/T |